How to Install Windows 7 via USB Flashdisk
So far I’ve tried searching for information on how to install Windows XP through a flash, and finally succeeded as well, although the process is running a bit slow and I think going too ya guns can be installed via a USB flash, has many articles that discuss installing windows 7 via USB cara2 flash, and I think not hurt to try another trick, who knows there is an increase in install speed.
Installing Windows 7 via USB flash is apparently a lot of advantages compared to the CD or DVD disc, We do not have to worry about CDs or DVDs with the same guns unreadable CD / DVD-ROM, CD or DVD is scratched, sometimes complicate the process of installing windows, while the flash itself, such things need to happen again is the guns.
I will show you 2 ways (manually or automatically) to install windows 7 via USB flash.
Before we begin, need to be prepared are: At least 1 4Gb flash with ato more, because Windows 7 at least took place amounted to 3Gb.
Manual Installation:
1. Plug your USB Flaskdisk. (Maukin well into the usb port, do not to another place).
2. Press WIN + R keys, type cmd and click OK.
3. Type diskpart and press ENTER.
4. Type list disk, press ENTER and choose which one is your USB flash, make no mistake hati2 who choose later salah2 keformat is another disk. If you have only 1 meal a USB hard drive is disk1 flaskdisknya.
5. Type select disk 1 and press ENTER.
6. Type the clean and press ENTER.
7. Type create partition primary and then press ENTER.
8. Type select partition 1 and press ENTER
9. Type active “and press ENTER.
10. Type fs = FAT32 format and press ENTER
11. Type assign and press ENTER
12. Type exit and press ENTER.
13. Insert the DVD disc and a copy of Windows 7 is all the contents of this DVD into your USB Flaskdisk.
14. Booting your computer through your USB stick, malalui bios settings on your computer, make sure his boot through a USB stick, if langkah2nya true, then the windows installation process should run through your USB stick.
Automatic Installation.
Auto mode of course is my choice, and to that already available program called WinToFlash, the program will pull through like the way the manual STEP 2 above, we need to do is run the program, select Windows 7 and the direction of the source of the USB flash.
1st. Download the latest version WinToFlash program.
2nd. Extract and run the file WinToFlash.exe
3. Click the “Check” and begin the process of transfer of the Windows setup wizard.
4. Click “Next”
5. Select the location of the file Windows 7 and location Flaskdisk your USB. click “Next”.
6. Select the “I Accepted the terms of the license agreement” and click “Continue”
7. Click OK to start formatting the USB stick and file2 windows 7 will be automatically inserted into your USB stick.
8. Click “Next” when finished copy, and booting your computer through your USB stick earlier.